intoolSENSOR
- Automatic detection of contact with the workpiece
- Tool breakage detection without additional measuring device
- Self-learning algorithm for precise contact detection
Highlights
Customer benefits
- Precise drilling depth independent of tool wear
- Time saving due to automatic recognition of the workpiece contact
- Increased process reliability due to closed control loop
Left: The ULTRASONIC system reacts to external load; Right: Tool contact detected
Downloads
Downloads
Technical data
Machines
ULTRASONIC 50
ULTRASONIC eVo linear
ULTRASONIC monoBLOCK
ULTRASONIC duoBLOCK
ULTRASONIC 200 Gantry
ULTRASONIC 210 P
Controls
CELOS with SIEMENS
● available
ULTRASONIC 50
Your perfect entry into 5-axis ULTRASONIC machining
Max. X-axis stroke
650 mm
Max. Y-axis stroke
520 mm
Max. Z-axis stroke
475 mm
Max. workpiece diameter
630 mm
Max. workpiece height
500 mm
Max. workpiece weight
300 kg
Control & software alternatives
SIEMENS
Highlights
ULTRASONIC technology integration - reduced process forces for higher productivity
- Technology integration via HSK-A63 interface for ultrasonic superimposition of the tool rotation with amplitudes up to 15 µm
- Process forces reduced by up to 50% through ULTRASONIC enable, depending on requirements: higher feed rates, improved surface quality up to Ra <0.1 µm, longer tool life
- Specific coolant treatment systems with centrifuges, optimized for the ULTRASONIC processing of Advanced Materials
ULTRASONIC 3rd Generation - Optimal process control through intelligent controls
- Constant amplitude in the process to ensure reproducibility
- Automatic detection of the working frequency, significantly improved hardware for signal acquisition
- Frequency tracking and simultaneous power control in real time for optimal process stability
- Ensuring the ULTRASONIC advantages even with non-optimal tools
- Fully compatible with 2nd generation ULTRASONIC actuator
The right machine configuration for every requirement, from 3-axis to 5-axis simultaneously
- Attractive 3-axis entry-level machine for ULTRASONIC machining - rigid table with 630 mm x 500 mm clamping surface and a maximum workpiece weight of 300 kg
- Direct-Drive C-axis up to 300 rpm, with 4-channel rotary feedthrough for vacuum - the perfect machine for processing rings made of ceramic and quartz glass
- Adaptive auxiliary spindle ULTRASONIC microDRILL with up to 32,000 rpm for small bores from Ø 0.1 mm with maximum process reliability
5-Axes Machining with up to 20,000 rpm
- speedMASTER 15,000 rpm with 21kW and 111Nm in basic version
- speedMASTER 15,000 rpm with 46kW and 200Nm optionally available
- speedMASTER 20,000 rpm with 35kW and 130Nm optionally available
Swivel Rotary Table for 5-Axes Simultaneous Machining
- Table load up to 300 kg
- Swivel area of the B-axis -35°/+ 110° for highest flexibility
- Cooled table bearings for highest precision
Tool magazine with 30 pockets in basic version
- Loading of tools from the front even during machining
- Excellent visibility and accessibility
- 60 or 120 pockets optionally available
Precision
- Comprehensive cooling concept for highest longterm precision
- One-piece machine bed
- Direct driven ball screw drives
- Direct path measuring systems in all axes
ULTRASONIC 210 P
5-axis ULTRASONIC machining in XXL
Max. X-axis stroke
2,100 mm
Max. Y-axis stroke
2,100 mm
Max. Z-axis stroke
1,250 mm
Max. workpiece length
3,200 mm
Max. workpiece diameter
2,500 mm
Max. workpiece height
1,460 mm
Max. workpiece weight
8,000 kg
Control & software alternatives
SIEMENS
Highlights
ULTRASONIC by DMG MORI
ULTRASONIC technology integration - reduced process forces for higher productivity
- Technology integration via HSK-A63 / HSK-A100 interface for ultrasonic superimposition of the tool rotation with amplitudes up to 15 µm
- Process forces reduced by up to 50% through ULTRASONIC enable, depending on requirements: higher feed rates, improved surface quality up to Ra <0.1 µm, longer tool life
- Specific coolant treatment systems with centrifuges, optimized for the ULTRASONIC processing of Advanced Materials
ULTRASONIC 3rd Generation - Optimal process control through intelligent controls
- Constant amplitude in the process to ensure reproducibility
- Automatic detection of the working frequency, significantly improved hardware for signal acquisition
- Frequency tracking and simultaneous power control in real time for optimal process stability
- Ensuring the ULTRASONIC advantages even with non-optimal tools
- Fully compatible with 2nd generation ULTRASONIC actuator
Precision
- Maximum accuracy through water-cooled feed drive
- Band filter unit with 980 l as standard
- Highest long-term accuracy due to cooled linear guideways and active spindle growth control.
Performance
- High dynamics with feed speed up to 60,000 mm/min
- Also available in mill- /turn - version
- Pallet changer for main time parallel setup as standard
- Biggest spindle range in the market: powerMASTER motor spindle with up to 1,000 Nm and torqueMASTER gear spindle with 1,800 Nm
Efficiency
- Lower energy consumption through intelligent needs-based power units.
- Gantry design with vertically moving cross beam with hydraulic weight compensation.
- Fast innovative wheel type magazine with up to 303 tools with minimized footprint.
Highest rigidity and dynamics up to 6 m/s²
- Thermosymetrical construction
- 3-point support with an inherently stiff machine bed, no foundation required
- High temperature stability standard with positioning accuracy down to 10 µm
- Position accuracy down to 8 µm with accuracy pack option
- Worldwide unique high precision varinat µPrecision with Position accuracy down to 4 µm
ULTRASONIC 200 Gantry
5-axis ULTRASONIC machining in XXL
Max. X-axis stroke
4,000 mm
Max. Y-axis stroke
2,000 mm
Max. Z-axis stroke
1,200 mm
Max. workpiece length
4,300 mm
Max. workpiece width
2,000 mm
Max. workpiece height
1,250 mm
Max. workpiece weight
20,000 kg
Control & software alternatives
SIEMENS
Highlights
ULTRASONIC by DMG MORI
ULTRASONIC technology integration - reduced process forces for higher productivity
- Technology integration via HSK-A63 / HSK-A100 interface for ultrasonic superimposition of the tool rotation with amplitudes up to 15 µm
- Process forces reduced by up to 50% through ULTRASONIC enable, depending on requirements: higher feed rates, improved surface quality up to Ra <0.1 µm, longer tool life
- Specific coolant treatment systems with centrifuges, optimized for the ULTRASONIC processing of Advanced Materials
ULTRASONIC 3rd Generation - Optimal process control through intelligent controls
- Constant amplitude in the process to ensure reproducibility
- Automatic detection of the working frequency, significantly improved hardware for signal acquisition
- Frequency tracking and simultaneous power control in real time for optimal process stability
- Ensuring the ULTRASONIC advantages even with non-optimal tools
- Fully compatible with 2nd generation ULTRASONIC actuator
Flexibility through spindle versions
- Vertical spindle with 20,000 rpm
- 45° head and 90° head for 5-axes machining up to 30,000 rpm
- Ready for new technologies like Ultrasonic, Laser or machining of carbon material
Working area concept
- Fixed table 2,250 x 2,000 mm with 10,000 kg loading capacity
- T-slots across the table for easy chip removal
- Chip conveyors on both sides of the table
Low Gantry Design
- 50 m/min rapid traverse
- Best visibility into the working area through missing side walls
- Maximum utilisation of the working area
5-axes machining
- 45° head with 90° swivel range and +/- 300° rotating range
- compactMASTER spindle with 20,000 rpm
- 90° head with +/- 120° swivel range and +/- 300° rotating range
- compactMASTER spindel with 20,000 rpm up to 30,000 rpm